Mk-32A Pneumatic Sealless Steel Strapping Combination Tool for Steel Strapping

• Customization: Available
• Application: Oil, Hair Care Products, Carbonated Drinks
• Strapping Material: Strip
• Model NO.: MK-32A
• Automatic Grade: Semi-Automatic
• Strapping Mode: Buckling Type
• Packaging Material: Metal
• Driven Type: Pneumatic
• Structure: Pressure Strapping
• Model: Mk-32A
• Net Weight: 24kg
• Transport Package: Carton Box with Stretch Film
• Specification: CE
• Trademark: YUPACK
• Origin: Qingdao
• HS Code: 8422400000
• Production Capacity: 100 Set a Month

Product Description

MK-32A Pneumatic Sealess Steel Strapping Combination Tool for steel strapping


 

1. Description

   MK-32A pneumatic sealless steel combination strapping tool for steel strapping and MK-32A structural principle of the same, after the band steel band consists of upper and lower punch, cuts, binding strip both ends of lap a shaped hole punch out for closure, without iron buckle, width 32mm wide strips. The machine needs to use with balancers. Widely used in logistics, chemical industry, food, daily chemical industry, wooden case strapping packing used.

2. Main Feartures

The automatic lacing, nips buckles, cuts belt one time to complete 
The use compressed air originates as the power, energy conservation environmental protection 
Does not need the steel buckle, consumes the material cost economical 
The working efficiency high, nips buckles the effect to be artistic 
May hit the 32mm wide steel strapping

3. Technical Data of pneumatic steel strapping machine

Model	MK-32A
Air pressure	0.5~0.7Mpa
Tension force	13KN/0.6Mpa
Sealing type	concave and convex buckle
Net weight	24KG
Strapping speed	5.5m/min
Strapping material	Steel strapping
Applicable strapping width	32mm
Applicable strapping thickness	0.8~1.0mm

4.Packing Method
Step 1
Left hand grip steel tape from the top of the loop will be bound by the packaging, end head back pressure in the steel belt directly below
Step 2
The right thumb press handle and four fingers lift to separate the tensioning machine from the base. the steel belt stack is inserted 20-30mm in front of the upper and lower punch by the left hand, the steel belt is pressed on the washer by the tensioning wheel
Step 3
Press the lower motor to start the switch L by right thumb finger,  tighten the rotation arm of the wheel to tighten the steel belt until it stops. At this time, the superimposed steel belt is locked by the gasket
Step 4
Press the cut-off switch S with the right thumb, and the punch cutting knife moves out of the seal and cuts out the excess steel belt. At this time, the left hand should hold the cut steel belt
Step 5
Press the handle with the right thumb, and hold the outer shell of the wind motor with four fingers. The resultant force separates the tension wheel from the base

5.Detail Pictures:








6.Company Information
Qingdao Ausense Packing Equipment Co.,Ltd is established in 2001. Professionally specialized for the planning of complete end-of-line packaging equipment, R & D and manufacturing. After years of practice, now Ausense has automatic box and bag packing, sealing, shrinking, vacuum,strapping, palletizing, wrapping, transportation and other 10 series that are over 60 varieties of packaging equipments. Company rely on the automation industry chain advantages, the integration of technology research and development, design, production, in conjunction with the customer site applications, providing customers with intelligent, flexible, one-stop information technology automated packaging solutions